Getting Started; System Requirements - ADC 6016 Instruction Manual

7. PC Link Software - Optional Accessory Sold Separately
This unit can be used in connection with your personal computer
(PC) running the PC Link Blood
Pressure nalyzer software. Your PC
will allow a capacity of monitoring
80 patients, each with 1000 data
(NOTE: Overuse will lower system
efficiency). The memory data can be
transferred to the PC by connecting
the monitor via the included USB
cable with your PC. Note: Software
does not work with Mac computers.

7.1. Getting Started

Tracking your blood pressure is important for you and your doctor. This
Blood Pressure nalyzer Software is easy to load and easy to use. Connect
your blood pressure monitor to your PC and download your data. Print
graphs, charts, and tables of your readings. Your blood pressure monitor
can be connected to a PC using the Blood Pressure nalyzer (BP ) Soft-
ware and the enclosed USB cable. Pay close attention to the USB
connection. Do not force the cable into the blood pressure moni-
tor or your computer.

7.2. System Requirements

NOTE: Before installing your Blood Pressure nalyzer Software,
be sure that your computer meets or exceeds the following re-
quirements:
Hardware
Microprocessor (CPU)
Memory Devices (R M)
Hard Disk
Communications Port
Hardware
Display
Resolution
Energy Source (Power)
Minimum
550MHz
256MB
500MB
USB 1.0 USB 1.0 and bove
Minimum
550MHz
256MB
LPT 500MB
C Power if use PC, C/DC if NB
Blood Pressure nalyzer Software
• Window 98SE, 2000, XP
• CD-Rom Drive
• Minimum 256MB R M
• 500MB vailable Hard Disk Space
• USB Port version 1.0 or higher
• DC dvantage
Monitor with USB port
Recommended
1GHz or Higher
512MB
800MB
Recommended
1GHz or Higher
512MB
800MB
System Requirements for
TM Blood Pressure
Operating System:
Windows 98SE, Windows
2000, Windows XP or above
Note: The software does not
work with ac computers.
*.Net 1.1 framework or above
required.