User Selection - ADC 6016 Instruction Manual

5.4. User Selection:

This advanced blood pressure monitor allows you to track blood
pressure readings for 2 individuals independently.
a) Before measurement make sure you
set the unit for the intended user. The
unit can track results for 2 individuals.
(User 1, User 2)
b) The unit is preset to User 1. Push and
hold the TIME button for 4 seconds to
initiate the user selection.
c) When the user icon is flashing, press
the MEMORY button to toggle
between users.
d) When the correct user is selected wait
three seconds for the user icon to stop
flashing. The monitor is now ready for
use.
e) Repeat the procedure again to change
users again.
+ Further Information
With each press of the button (TIME,
MEMORY) one input is made (e.g. switching over from
hours to minutes, or altering the value by 1). However, if you keep
the respective button depressed, you can switch more quickly to the
desired mode, or find the desired value respectively.