Combination Switch - Mercedes-Benz G-Class Operator's Manual

X
To switch on the parking lamps: the
SmartKey is not inserted in the ignition lock
or it is in position 0(
X
Turn the light switch to W (left-hand side
of the vehicle) or X (right-hand side of
the vehicle).
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated ten times while the lights are on and
the engine is running (
switch off the ignition, the automatic
headlamp cleaning system is reset and
counting is resumed from 0.

Combination switch

Turn signals
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow ; or ?.
Y page 139).
Y page 114). When you
High-beam headlamps
High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the à position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The blue K indicator lamp in the
instrument cluster lights up when the high-
beam headlamps are switched on.
X
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The blue K indicator lamp in the
instrument cluster goes out.
Exterior lighting
103
Z