Programming The Remote Control - Mercedes-Benz G-Class Operator's Manual

Certain garage door drives are
i
incompatible with the integrated garage
door opener. If you have difficulty
programming the integrated garage door
opener, contact an authorized Mercedes-
Benz Center. You can also contact the
following service hotlines:
USA: Mercedes-Benz Customer
R
Assistance Center at
1-800-FOR-MERCedes
Canada: Customer Service at
R
1-800-387-0100
i USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
i Canada only:
This device complies with the RSS-210
Rules of Industry Canada. Operation is
subject to the following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.

Programming the remote control

Programming
G
WARNING
Only press the button on the integrated
garage door opener if there are no persons or
objects present within the sweep of the
garage door. Persons could otherwise be
injured as the door moves.
Integrated remote control in the rear-view mirror
Indicator lamp
:
Transmitter buttons
;=?
Garage door remote control
A
Transmitter button on the garage
B
door remote control
Garage door remote control A is not part of
the garage door opener.
i
To achieve the best result, insert new
batteries in garage door remote control
A of your garage door drive before
programming.
X
Delete the memory of the integrated
remote control ( Y page 284) before
programming it for the first time.
X
Turn the SmartKey to position
2( Y
page 139) in the ignition lock.
X
Press and hold transmitter button ;, =
or ?.
After a short time, indicator lamp : will
start flashing. It flashes approximately
once per second.
i Indicator lamp : flashes immediately
the first time that the transmitter button is
programmed. If this transmitter button has
already been programmed, indicator
lamp : will only start flashing at a rate of
once a second after 20 seconds have
elapsed.
X
Continue to hold the transmitter button.
Features
281
Z