Downloading Routes - Mercedes-Benz G-Class Operator's Manual

The vehicle data can now be sent to the
Customer Assistance center.
X
OK
Press to confirm the message.
The voice connection with the Customer
Assistance center is terminated.
Vehicle Diagnosis:
The
Transferring data...
appears.
The vehicle data is sent to the Customer
Assistance center.
Depending on what the customer service
representative agreed with you, the voice
connection is re-established after the transfer
is complete. If necessary, you will be
contacted at a later time by another means,
e.g. by e-mail or phone.
Further functions of the vehicle remote
malfunction diagnosis include, for example:
transfer of service data to the Customer
R
Assistance center. If a service is overdue,
the COMAND display shows a message
about various special offers at your
workshop.
monthly status information e-mail on oil
R
level, air pressure, maintenance, brakes,
etc. If applicable, you will receive
information on special offers in the e-mail.
USA only: this information can also be
called up under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
( Y page 24).
Information on Roadside Assistance
( Y page 22).

Downloading routes

Downloading routes allows you to transfer
and save predefined routes in the navigation
system. To do this, an SD memory card must
be inserted into the COMAND system. If no
SD memory card is inserted, you must insert
the card into the card slot on the COMAND
system before saving.
A route can be prepared and sent either by a
customer service representative or via the
mbrace portal on the Internet. Each route can
include up to 20 way points. When a route has
been received by the navigation system, the
'Route name' has been saved to
memory card. Do you want to start
route guidance?
COMAND display. The route is saved to the
message
SD memory card.
X
i
X
i
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle. If this
selected speed is exceeded by the vehicle, a
message will be sent to the Customer
Assistance center. The Customer Assistance
center then forwards this information to you.
You can select the way in which you receive
this information beforehand. Possible options
include text message, e-mail or an automated
call.
The data which is sent to the Customer
Assistance center contains the following
information:
R
R
R
message appears on the
To start route guidance: select Yes.
An overview of the route is shown in the
display.
If you select No, the saved route can be
called up later in the navigation menu.
Select Start.
Route guidance is started.
Downloaded and saved data can be called
up again in COMAND. Further information
can be found in the "COMAND", "Online
and Internet services" and "Download
destination/route" sections.
the location where the speed limit was
exceeded
the time at which the speed limit was
exceeded
the selected speed limit which was
exceeded
Features
279
Z