Mercedes-Benz G-Class Operator's Manual page 144

Driving
142
The ECO start/stop function is activated each
time the engine is switched on.
The ECO start/stop function is only available
in drive program C.
The system is operational when the ¤
symbol is shown in green in the multifunction
display.
The system is operational if all conditions for
automatic engine switch-off have been
fulfilled ( Y page 142) and the ¤ symbol is
shown in green in the multifunction display.
In addition, the
message is shown in the AMG menu in the
multifunction display.
If not all conditions for automatic engine
switch-off ( Y page 142) are fulfilled, the
¤ symbol is shown in yellow in the
multifunction display.
In addition, the
message is shown in the AMG menu in the
multifunction display.
If the ECO start/stop function has been
manually deactivated (
malfunction has caused the system to be
deactivated, the ¤ symbol is not
displayed.
Stop/Start active
The
inactive
message in the AMG menu in the
multifunction display goes out.
Deactivating/activating the ECO start/
stop function
ECO button
Stop/Start active
Stop/Start inactive
Y page 142) or a
Stop/Start
or
X
To switch off: press button : in drive
program C.
or
X
Switch to drive program S or M
( Y page 149).
Indicator lamp ; on button : and the
¤ symbol in the multifunction display go
out.
Stop/Start active
The
inactive
message in the AMG menu in the
multifunction display goes out.
X
To switch on: press button :.
Indicator lamp ; lights up. If drive
program S or M is active, the automatic
transmission switches to drive program C.
If all conditions for automatic engine
switch-off ( Y page 142) are fulfilled, the
¤ symbol is shown in green in the
multifunction display. In addition, the
Stop/Start active
the AMG menu in the multifunction display.
If conditions for automatic engine switch-
off ( Y page 142) have not been fulfilled, the
¤ symbol will be shown in yellow. If this
is the case, the ECO start/stop function is
not available. In addition, the
inactive
message is shown in the AMG
menu in the multifunction display.
i If indicator lamp ; is off, the ECO start/
stop function has been deactivated
manually or as the result of a malfunction.
The engine will then not be switched off
automatically when the vehicle stops.
Automatic engine switch-off
If the vehicle is braked to a standstill in D or
N, the ECO start/stop function switches off
the engine automatically.
The ECO start/stop function is operational
and the ¤ symbol is displayed in green in
the multifunction display, if:
the indicator lamp in the ECO button is lit
R
green.
no off-road program has been selected.
R
Stop/Start
or
message is shown in
Stop/Start