6. Lower the printer cover. Press it gently until it clicks shut.
7. Remove all paper from the MP tray and clean the tray with a
clean, dry, lint-free cloth.
Cleaning the paper path rollers
Paper is sometimes dusted with a powder to keep the image on
one sheet from bleeding over to the back of the sheet stacked on
top of it. When feeding such paper from the MP tray, the dust
tends to get onto the paper roller and eventually causes misfeeds
to occur. Use the following procedure to clean the paper roller
when you start having feed problems from the MP tray.
Follow these steps to clean the paper roller:
1. Make sure the printer is turned off.
2. Open the printer cover by pressing the latch.
Cleaning and Transporting
7
7
7
7
7
7
7
7
7
7
7
7
111