Epson EPL-5900L Reference Manual page 95

Note:
Be careful to avoid dropping screws into the printer when removing
them. It may be helpful to use a magnetic screwdriver.
w
Warning:
❏ Make sure that the printer is turned off.
❏ Remove only two screws attaching the right side cover.
❏ Removing other screws and covers will expose high
voltage areas.
4. Identify the slot into which the SIMM is to be installed—the
long slot with the two clips at the ends.
w
Warning:
Avoid touching the electrical components that are exposed
after you remove the side cover. Be aware that these
components may become hot while the printer is in use.
c
Caution:
Before you install the module, be sure to discharge any static
electricity by touching a grounded piece of metal. Otherwise,
you may damage static-sensitive components.
Installing and Removing Options
This is the slot
for the SIMM.
87
5
5
5
5
5
5
5
5
5
5
5
5