1. Click the Special tab.
2. Check the Watermark check box.
3. Click Watermark Settings. The Watermark dialog box
appears.
4. Click New/Delete. The User Defined Watermarks dialog box
appears.
5. Select Text or BMP and type a name for the new watermark
in the Name box.
6. If you select Text, type the watermark text in the Text box. If
you select BMP, click Browse, select the BMP file you want to
use, then click OK.
Note:
Before making a custom watermark, you should prepare a bitmap
(.bmp) file.
7. Click Save to save the new watermark, and then click OK to
close the User Defined Watermarks dialog box. Your
watermark will appear in the list box.
8. Click OK to register the new watermark settings.
Monitoring your printer (EPSON Status Monitor 3)
About EPSON Status Monitor 3
The EPSON Status Monitor 3 is a utility program that monitors
your printer and gives you information about its current status.
For example, you can find out the amount of remaining toner
through this utility. If a print error occurs, the utility provides you
with a message describing the error. The Status Monitor 3 is
accessed from within the printer driver. See the following section
for more information.
34
Using the Printer Driver