Z-Config Program - Carel BP SE Sensor User Manual

ENG

14. Z-CONFIG PROGRAM

System requirements
Z-Confi g runs on a Personal Computer with the Microsoft Windows 98, 2000,
XP or XP SP2 operating system.
The program's limited use of memory resources (hard disk-RAM) means it can
be installed and run on any recent PC.
Installation of the program requires installation of the DotNetFramework
version 2.0
Starting the program
When starting Z-Confi g, the following screen is displayed:
Fig. 14.a
Main program windows
The program is divided into three main windows, selected using the buttons
at the top left of the program window
Fig. 14.b
System Settings:
Window containing the settings for the serial communication port, network
settings and graphics settings under the "Graphics Network" window.
Data Table:
This window shows the summary table of past and current wireless
communication between the Router-Sniff er and the devices in the network
this is connected to.
Graphics Network:
Window showing a graph of connection levels between the devices in the
network.
"Wireless probes" +0300030EN - rel. 1.0 - 16.07.2010 56