Si Industrial Sensor; Functions Implemented And Supervisor Variables Available - Carel BP SE Sensor User Manual

ENG
6.1 Functions implemented and supervisor
variables available
Parameters and functions
•
Temperature measurement performed every transmission cycle;
•
Humidity measurement performed every transmission cycle;
•
Light intensity measurement performed every transmission cycle;
•
Temperature alarm when exceeding the minimum and maximum
thresholds set by parameter;
•
Humidity alarm when exceeding the minimum and maximum thresholds
set by parameter;
•
Light intensity alarm when exceeding the minimum and maximum
thresholds set by parameter;
•
Low battery level alarm;
•
Data transmission at settable interval in minutes (this aff ects battery life);
Main variables available to the supervisory system
•
Temperature;
•
Humidity;
•
Light intensity;
•
Battery level in mV ;
•
Wireless signal level in dBm +100 (8 = low signal, 15 to 30 = medium signal,
greater than 30 excellent).
•
Temperature, humidity and light alarm status relative to high and low
thresholds.
•
Data transmission interval;
•
TimeStamp for recording the instant measurement, expressed in hh:mm.
Temperature alarm function:
HI_TEMP_TRESHOLD
LO_TEMP_TRESHOLD
ALARM
Humidity alarm function:
HI_UMID_TRESHOLD
LO_UMID_TRESHOLD
"Wireless probes" +0300030EN - rel. 1.0 - 16.07.2010

6. SI INDUSTRIAL SENSOR

The SI Sensor is used to measure the temperature, humidity and light intensity in residential or light industrial applications. It features one
temperature probe, one humidity probe and one light intensity sensor to measure ambient conditions, and sends the data measured
to the Access Point at regular intervals..
Fig. 6.a
High temperature event started normal condition
Alarm ON
High humidity event started normal condition
Alarm ON
ALARM
Alarm ON Alarm ON
Fig. 6.b
Alarm ON Alarm ON
Fig. 6.c
26
EN_HI_TEMP_ALM
Time
EN_HI_TEMP_ALM
Time