Set Sensor Address - Carel BP SE Sensor User Manual

ENG

12.17 Set Sensor address

The menu for setting the sensor address is used to assign the Modbus address to special sensors (sensors without dipswitches).
Z-HANDHELD
ZB-CAREL
SENSOR
MENU
>Sens List
>Set Addr
>Leave
Press
sensor already belongs
(sensor already bound).
Device recognised
compatible with the
address setting.
Z-HANDHELD
ZB-CAREL
ADDRESSING
NEW SENSOR
Found
Sensor
Type: 63
MAC 0x6324
Set
Address
>> 100 <<
Press
Z-HANDHELD
ZB-CAREL
ADDRESSING
NEW SENSOR
Setting
If the selected
Addr 100
address is
already used
Address
further
Not Free
confirmation
Are you
is requested.
>No
>Yes
Press
"Wireless probes" +0300030EN - rel. 1.0 - 16.07.2010
Z-HANDHELD Z-HANDHELD
ZB-CAREL
ADDRESSING ADDRESSING
NEW SENSOR NEW SENSOR
Waiting
Open
for new
Network?
sensor...
>No
>Yes
Stimulata
Press
The "Stimulate Sensor"
Respond No if the
message flashes.
With this message,
to the network
the handheld
requests sensor
Respond Yes if the
stimulation.
sensor has not yet
been bound.
Z-HANDHELD Z-HANDHELD
ZB-CAREL
ADDRESSING ADDRESSING
NEW SENSOR NEW SENSOR
Setting
Contacting
Addr 100
Are You
Sure??
Stimulata
>No
>Yes
Press Press
The "Stimulate Sensor"
message flashes.
With this message,
the handheld
requests sensor
stimulation.
sure?
ZB-CAREL
Sensor!
to esc
ZB-CAREL
Node...
Sensor!
minute delay.
Z-HANDHELD Z-HANDHELD
ZB-CAREL ZB-CAREL
ADDRESSING ADDRESSING
NEW SENSOR NEW SENSOR
Sensor Sensor
Type: 63 Type: 63
MAC 0x6324 MAC 0x6324
Addr 100 Addr 100
Put in
SleepMode?
COMPLETE
>No
>Yes
Press
Press Key
Fig. 12.q
52
If the operation
Z-HANDHELD
is cancelled
ZB-CAREL
on the keypad.
ADDRESSING
NEW SENSOR
Waiting
for new
sensor...
Z-HANDHELD
Aborted
ZB-CAREL
ADDRESSING
NEW SENSOR
Press Key
Waiting
for new
sensor...
Sensor not
Present
Press Key
Z-HANDHELD
ZB-CAREL
ADDRESSING
NEW SENSOR
Contacting
Node ...
Aborted
After a two
Z-HANDHELD
ZB-CAREL
End by
Press Key
timeout.
ADDRESSING
NEW SENSOR
Contacting
Node ...
Sensor not
Present
Press Key
PROCESS
Address setting
procedure
concluded
successfully.
After a two
minute
delay.
End by
timeout.