TH-37PR11UK / TH-37PR11UH
8.15.2. Removal of Front Glass
1. Remove the Cabinet.
(Refer to Removal of Cabinet and Speaker (L, R))
Note: when Front Glass is exchanged
• Along each fixed Angles of an top and bottom, right and
left order and the sponge for the Front Glass is pasted to
the Front Glass.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.16. Removal of Plasma Panel
The C1, C2 Boards are connected with the plasma panel
for the repair.
1. Remove 3 screws ( ) and then remove the Ferrite Core
from the Stand Block (L, R) and Plasma Panel.
2. Remove 12 screws ( ) and then remove the Stand Block
(L, R).
3. Disconnect the connectors (DS4, DS6, DS7).
4. Remove the Flexible Cables from the connectors (DS1,
DS3).
5. Disconnect the Relay Connectors (DS2, DS8, DS15).
6. Remove 5 screws and then remove the Slot Block.
7. Disconnect the connector (DN5).
8. Remove 4 screws and then remove DN-Board Block.
9. Disconnect the connectors (P2, P9, P11, P12, P25).
10. Remove 10 screws ( ) and then remove P-Board.
11. Remove 3 screws ( ) and then remove the AC-Inlet
Block.
12. Remove the Flexible Cables from the connectors (C11,
C21, SC20).
24