4. Remove 6 screws and then remove SC-Board.
8.10. Removal of SS-Board
1. Disconnect the connectors (SS11, SS12, SS23, SS34).
2. Remove the Flexible Cables from the connectors (SS53,
SS56)
3. Remove 5 screws and then remove SS-Board.
8.11. Removal of C1, C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 2 screws ( ) and then remove the Ferrite Core
from the Stand Block (L, R).
3. Remove 12 screws ( ) and then remove the Stand Block
(L, R).
8.11.1. Removal of C1-Board
1. Remove the Flexible Cables from the connectors (C10,
C11).
2. Remove 8 screws ( ) and then remove the Flexible
Cables from the connectors (CB1, CB2, CB3, CB4).
3. Remove 4 screws ( ) and then remove C1-Board.
8.11.2. Removal of C2-Board
1. Remove 3 screws and then remove the AC-Inlet Block.
2. Disconnect the connector (C23).
3. Remove the Flexible Cables from the connectors (C20,
C21).
4. Remove 8 screws ( ) and then remove the Flexible
Cables from the connectors (CB5, CB6, CB7, CB8).
5. Remove 4 screws ( ) and then remove C2-Board.
8.12. Removal of S-Board
1. Disconnect the connector (S1).
2. Remove 1 screw and then remove the Ground wire from
the S-Board Block.
3. Remove 1 screw (A) and then remove the S-Board Block.
21
TH-37PR11UK / TH-37PR11UH