8 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
•
,
,
,
,
and
marks indicate screw positions.
8.1.
Removal of Rear Cover
1. Remove screws (×4
remove the Rear Cover.
8.2.
Removal of Slot Block
1. Disconnect the connectors (DS4, DS6, DS7).
2. Remove the Flexible Cables from the connectors (DS1,
DS3).
3. Disconnect the Relay Connectors (DS2, DS8, DS15).
4. Remove 5 screws and then remove the Slot Block.
8.3.
Removal of HX-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
, x6 , ×8
, ×15
) and then
2. Remove 6 screws and then remove the Slot Case.
3. Disconnect the connector (HX1).
4. Remove 4 Hexagonal-Head screws and 2 screws and
then remove HX-Board.
8.4.
Removal of DS-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove the Slot Case.
(Refer to Removal of HX-Board)
3. Disconnect the connectors (DS2, DS8, DS14, DS15).
4. Remove 8 screws and then remove the Slot Plate.
19
TH-37PR11UK / TH-37PR11UH