Removal Of Plasma Display Panel - Panasonic TH-60PF30W Service Manual

3. Remove the LED Panel and Remote Sensor Panel.
9.21. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis-
play panel for the repair.
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (A11, A22).
3. Remove 24 screws.
4. Pull the bottom of the Cabinet Block forward and lift.
5. Disconnect the Fan Relay Connectors.
6. Remove 7 screws and then remove the Fan Block (A, B,
C).
7. Disconnect the connectors (DS13, P9).
8. Remove the flexible cable from the connector (DS1).
9. Remove 4 screws and then remove the Slot Block.
10. Remove 3 screws and then remove the HX Sub Metal.
11. Disconnect the connectors (A16, A37).
12. Remove the flexible cable from the connector (D15).
13. Remove 4 screws and then remove the A-Board Block.
29
TH-60PF30W