Computer Setup And Hp Pc Hardware Diagnostics (Uefi); Using Computer Setup; Starting Computer Setup; Navigating And Selecting In Computer Setup - HP ElitePad 1000 G2 User Manual

11 Computer Setup and HP PC Hardware
Diagnostics (UEFI)

Using Computer Setup

Computer Setup, or F10 BIOS Setup (Basic Input/Output System), controls communication between
all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and
printer). Computer Setup includes settings for the types of devices installed, the startup sequence of
the tablet, and the amount of system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the tablet
from operating properly.

Starting Computer Setup

To start Computer Setup, follow these steps:
1. Shut down the tablet.
2. To power on the tablet, press the Power button and Volume down button simultaneously.
The Startup menu is displayed.
3. Press

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1. Shut down the tablet.
2. To power on the tablet, press the Power button and Volume down button simultaneously.
The Startup menu is displayed.
3. Press
Tap a menu or a menu item to select it.
●
To close open dialog boxes and return to the main Computer Setup screen, tap Escape,
●
and then follow the on-screen instructions.
4. To exit Computer Setup menus without saving your changes, select Main, select Ignore
Changes and Exit, and then follow the on-screen instructions.
5. To save your changes and exit, select Main, select Save Changes and Exit, and then follow the
on-screen instructions.

Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.
54 Chapter 11 Computer Setup and HP PC Hardware Diagnostics (UEFI)
f10 to enter Computer Setup.
f10 to enter Computer Setup.