Computer Setup And Hp Pc Hardware Diagnostics (Uefi); Using Computer Setup; Starting Computer Setup; Navigating And Selecting In Computer Setup - HP ElitePad 1000 G2 User Manual

11 Computer Setup and HP PC Hardware
Diagnostics (UEFI)

Using Computer Setup

Computer Setup, or F10 BIOS Setup (Basic Input/Output System), controls communication between all the
input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer
Setup includes settings for the types of devices installed, the startup sequence of the tablet, and the amount
of system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the tablet from
operating properly.

Starting Computer Setup

To start Computer Setup, follow these steps:
1. Shut down the tablet.
2. To power on the tablet, press the Power button and Volume down button simultaneously.
The Startup menu is displayed.
3. Press f10

Navigating and selecting in Computer Setup

To navigate and select in Computer Setup, follow these steps:
1. Shut down the tablet.
2. To power on the tablet, press the Power button and Volume down button simultaneously.
The Startup menu is displayed.
3. Press f10
●
Tap a menu or a menu item to select it.
● To close open dialog boxes and return to the main Computer Setup screen, tap Escape, and then
follow the on-screen instructions.
4. To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and
Exit, and then follow the on-screen instructions.
5. To save your changes and exit, select Main, select Save Changes and Exit, and then follow the on-
screen instructions.

Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.
to enter Computer Setup.
to enter Computer Setup.
Using Computer Setup 55