Using Optional External Devices; Using Optional External Drives - HP ElitePad 1000 G2 User Manual

2. Insert the rest of the lanyard through the bottom loop (2), and then pull the lanyard away from
the loop to secure it (3).

Using optional external devices

NOTE: For more information about required software and drivers, or to learn which port to use, see
the manufacturer's instructions.
To connect an external device to the tablet:
CAUTION:
sure that the device is turned off and the AC power cord is unplugged.
1. Connect the device to the tablet.
2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet.
3. Turn on the device.
To disconnect an unpowered external device, turn off the device, and then disconnect it from the
tablet. To disconnect a powered external device, turn off the device, disconnect it from the tablet, and
then unplug the AC power cord.

Using optional external drives

Removable external drives expand your options for storing and accessing information. A USB drive
can be added by connecting the drive to a USB port on the tablet.
NOTE: HP external USB optical drives should be connected only to powered USB ports; therefore,
HP does not recommend connecting HP external USB optical drives to the tablet.
USB drives include the following types:
1.44-megabyte diskette drive
●
Hard drive module
●
External optical drive (CD, DVD, and Blu-ray)
●
MultiBay device
●
To reduce the risk of damage to the equipment when connecting a powered device, be
Using optional external devices 43