Gree GWH12MB-K3DNE3G Service Manual page 68

Service Manual
Steps
4.Remove electric box assy
Remove the screws of the electric box
assy.Remove the screws at the joint of
the earthing wire and evaporator.Loosen
the clasp at the joint of the electric box
cover and the electric box.Remove the 2
screws of the display.Remove the electric
box assy.
5.Remove evaporator
Remove the screws of the press plate of
1
connecting pipe.Remove press plate of
connecting pipe.
Remove the 3 screws at the joint of the
2
evaporator and rear case.Adjust slightly
the pipe on the evaporator.Remove the
evaporator.
65
Procedure
Display Board
Electric Box Assy
Pipe Clamp
Evaporator
Auxiliary Piping
Installation and Maintenance