Advanced Network Settings - D-Link DIR-803 User Manual

Section 3 - Configuration
UPnP Universal Plug and Play) allows the router to
Enable UPnP IGD:
automatically open ports. For maximum security,
uncheck to disable this feature. However, you will need
to manually open ports for certain applications. Refer to
"Port Forwarding" on page 67
on page 68.
Enable WAN Ping Checking this box will allow the DIR-803 to respond
Response: to pings. Unchecking the box may provide some extra
security from hackers.
WAN Port Speed:
The WAN speed is usually detected automatically. You
may set the port speed of the Internet port to 10Mbps,
100Mbps, or Auto 10/100Mbps (recommended).
Enable Multicast Check the box to allow multicast traffic to pass through
Streams: the router from the Internet (IPv4).
Enable IPV6 Check the box to allow multicast traffic to pass through
Multicast Streams:
the router from the Internet (IPv6).
D-Link DIR-803 User Manual

Advanced Network Settings

and "Application Rules"
83