3.
Activate the RF Radio switch. Establish any required
connections:
Fig. 6 - Establish connections
1
Currently not used
2
Terminal for emergency power supply
3
Terminal for enable input, 1 × NOC (normally open
contact)
4
Terminal for power supply 12–24 V AC/DC, 3 W
4.
Connect the device with which you want to trigger
the authorizations (push-button, higher-order
control, etc.) with the enable input:
Fig. 7 - Connecting the enable device
OMEGA FLEX Radio switch
Fitting and commissioning
Page 23 of 51