For your safety
4.4.5
Danger of property damage
To prevent property damage, the following safety instructions
should be observed:
Always have repairs performed by properly qualified
personnel.
Only use accessories and spare parts recommended by
CEStronics.
Do not use any drilling machines or cordless screwdrivers
when fastening the radio switch.
Only use the proper tools to open the locking device.
When fitting the locking device, make sure that the lock and
the plate/rose are in a perfect condition. Malfunctions of the
lock may impair the functioning of the locking device.
Make sure that the cylinder can be inserted through the
profile cylinder hole of the plate/rose and the lock without
jamming and without using force during the installation. If
this is not possible, align lock and plate/rose so as to
prevent jamming and/or bending of the locking cylinder
during its installation.
Do not use any lubricants or oils for the radio switch.
Do not drop the radio switch on the floor, on hard surfaces
or on hard objects.
Protect the electronic components of the radio switch
against water and other liquids.
The radio switch contains highly sensitive electronic parts
that may be damaged or destroyed through static charges.
Do not disassemble the radio switch in rooms with built up
static charge.
The inside knob of the locking cylinder/device may not be
used for outdoor application.
Page 10 of 51
OMEGA FLEX Radio switch