CEStronics Omega Flex Fitting And Operating Instructions page 17

Radio switch
Hide thumbs Also See for Omega Flex:
Table of Contents

Advertisement

5.4.4
RF-INI-MASTER
The RF-INI-MASTER is used to switch your /NET locking devices
into online (RF) mode and into learning mode. Your locking
devices must be in this mode to establish a cooperation with
the radio switch.
To set the RF mode (Online mode) of your locking devices
with the RF-INI-MASTER, proceed as follows:
Keeping the RF INI MASTER about two seconds before your
locking device.
As a result, you get a short green signal and a short sound.
To put your locking device in the offline mode, proceed as
follows:
Keeping the RF INI master before the locking device, until
the following signaling is finished.
As a result, you get the green signal for about five seconds, as
well as an acoustic signal.
OMEGA FLEX Radio switch
Introduction
Page 17 of 51

Advertisement

Table of Contents
loading

Table of Contents