Download Print this page

Legacy LCD87DFX Owner's Manual

Mobile video system

Advertisement

Quick Links

TROUBLE SHOOTING

Before going through the check list, check wiring connection.If any of the problems
persist after check list has been made, consult your nearest service dealer.
Symptom
Cause
No power.
The car ignition switch is
not on.
The fuse is blown.
Disc cannot be
Presence of disc inside the
loaded or ejected.
player.
Inserting the disc in reverse
direction.
The disc is extremely dirty or
defective.
Temperature inside the car
is too high.
Condensation.
No sound.
Volume is in minimum.
Wiring is not properly
connected.
Sound skips.
The installation angle is
more than 30 degrees.
The disc is extremely dirty
or defective disc.
The operation keys
The built-in microcomputer
do not work.
is not operating properly
due to noise.
The radio does not
The antenna cable is not
work.
connected.
The signals are too weak.
WWW.Legacycaraudio.com
11
Solution
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
A
to " CC"
Replace the fuse.
Remove the disc in the player,
Then put a new one
Insert the compact disc with
the label facing upward.
Clean the disc or try to play a
new one.
Cool off or until the ambient
temperature return to normal.
Leave the player off for an hour
then try again.
Adjust volume to a desired level.
Check wiring connection.
Adjust the installation angle less
than 30 degrees.
Clean the compact disc, then
try to play a new one.
Press the RESET button.
Front panel is not properly fixed
into its place.
Insert the antenna cable firmly.
Select a station manually.
OWNER's MANUAL
Mobile Video System
ANTI-THEFT FLIP DOWN DETACHABLE PANEL
AUTO-LOADING COMPACT DISC PLAYER
AM/FM/LW(
OPTIONAL
)-STEREO DIGITAL PLL TUNING RADIO
WITH INFRARED REMOTE CONTROLLER

Advertisement

loading

Summary of Contents for Legacy LCD87DFX

  • Page 1: Trouble Shooting

    TROUBLE SHOOTING Before going through the check list, check wiring connection.If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause No power. The car ignition switch is not on. The fuse is blown. Disc cannot be Presence of disc inside the loaded or ejected.
  • Page 2: Customer Notice

    CUSTOMER NOTICE SPECIFICATIONS GENERAL Power requirement...DC 12V Current consumption...5A POWER OUTPUT... 4X7W FM SECTION For 3 Bands For 2 Bands (Europe) (Europe) Frequency range 87.5 to 108 MHz 87.5 to 108 MHz 87.5 to 107.9 Mhz Usable sensitivity...3uV I.F Frequency...10.7MHz. AM SECTION For 3 Bands For 2 Bands...
  • Page 3: Basic Operation

    NOTES DISC PLAY: Cleaning discs Before playing, clean the disc with a clean, lint-free. Flip the disc in the direction of the arrow. NOTE: .Do not use so solvents such as benzine, thinners. Commercially available cleaners or anti static spray damage the unit. Insert a disc with the label surface down.
  • Page 4: Installation

    BASIC OPERATION 1. OPEN BUTTON Press it to flip down the front panel then you can insert the cd disc into the cd compartment EJ button on the back of the front panel,press it to eject the disc. 2.8.9 SEL( AUDIO MODE SELECT)/ +/- BUTTONS Press SEL button to change the mode in the sequence of (Volume) (Bass)
  • Page 5 INSTALLATION DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER CONSOLE PLAIN WASHER TAPPING SCREW While installing the front panel, please mount the left side first, then push the right side. TAPPING SCREW (M1.7X4 KM BLACK) BASIC OPERATION display for a few seconds. Regional mode OFF The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
  • Page 6: Electric Connection

    BASIC OPERATION When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. If corresponding PTY information is not existed any more, PTY type is automatically exit to normal mode. 20.TA BUTTON (for RDS model only) TA function [TRAFFIC ANNOUNCEMENT] BUTTON(For RDS only)