Related Manuals for Legacy LCD30D
Summary of Contents for Legacy LCD30D
- Page 1 LCD30D INSTRUCTION MANUAL AUTO-LOADING COMPACT DISC PLAYER WITH AM/FM TUNING RADIO AND DETACHABLE FRONT PANEL WWW.LEGACYCARAUDIO.COM...
- Page 2 LOCATION AND FUNCTION OF CONTROLS 1.RELEASE BUTTON Press it to detach the front panel when you want to take away. 2.TUNING KNOB Rotate it to select your desired broadcasting station. 3.CD COMPARTMENT 4.FREQUENCY COUNTER 14, 15.TRACK UP/DOWN BUTTONS By the pointer,the display shows the frequency of the broadcasting station being received.
- Page 3 , 1 . OLUME CONTROL Press the to increase or decrease the volume level. .E ECT BUTTON Press it to e ect the CD DISC. .LOC BUTTON Press it to select distance reception or local reception. Local control is no effect at AM band. 1 .MUTE BUTTON Press it to reduce the volume level immediately.
- Page 4 16.TOP BUTTON Press this Button to go to the start of the CD (CD will start again from Track 1). 1 .RPT BUTTON During CD mode, Press RPT button to repeat a single track. 1 .FM LIG T The frequency in the FM station ,the FM light be lighted. 2 .AM LIG T The frequency in the AM station ,the AM light be lighted.
-
Page 5: Disc Play
DISC PLAY: Cleaning discs Before playing ,clean the disc with a clean, lint-free, Flip the disc in the direction of the arrow. Note: Do not use so solvents such as benzine, thinners, commercially available cleaners or anti static spray damage the unit: insert a disc with the label surface down. - Page 6 Before going through the check list, wiring connection, should any of the problem persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution The car ignition is not on. If the power supply is properly connected to the car accessory No power switch the ignition key to ACC...
- Page 7 ANTENNA PLUG W ITE (L) RCA LINE OUT PLUG RED (R) POWER SUPPLY BLACK GROUND AUTO ANTENNA YELLOW GREEN GREY GREEN/W ITE GREY/W ITE LEFT RIG T GREEN GREY GREEN/W ITE GREY/W ITE NOTE: In spite of having any kinds of speaker system, must use 4ohms impedance of speaker to reduce the distortion during high volume level.