Schroeder America ARIZONA TEA DISPENSER 925 Installation Instruction, Parts List And Configuration Manual page 3

Mounting Template
C. Sealing to countertop:
To comply with National Sanitation Foundation (NSF) requirements with the United States,
1. Liberally apply silastic sealant (such as Dow Corning RTV 730 or equivalent) on base bottom
edge.
DO NOT move unit after positioning, or the seal from base to counter will be broken.
2. Apply additional sealant around bottom of base. Seal must have a minimum 1/2" radius to
prevent crevices and to ensure a complete seal.
3. Allow sealant to dry to MFG recommendations.
D. Assemble washers and nuts to bolts from underneath the countertop. Tighten firmly. DO NOT
OVER TIGHTEN!
E. Using a right angle beverage fitting supplied in the install kit, attach inlet water and concentrate
tubes to the back of the flow control modules. Tubing can be routed either through a hole in the
countertop or through the access point in the back of the urn. (Be sure to use proper size hose
clamps to secure tubing to inlet fittings).
Base
NOTE:
unit base must be sealed to the countertop.
NOTE:
Fully Installed Can
3