Download Print this page

Schroeder America ARIZONA TEA DISPENSER 925 Installation Instruction, Parts List And Configuration Manual page 2

Arizona tea dispenser (tea urn)
Hide thumbs Also See for ARIZONA TEA DISPENSER 925:

Advertisement

1. DISPENSER DIMENSIONS AND WEIGHT
A. Double valve dispenser weight is 13 lbs.
B. Double valve shipping weight is 19 lbs.
2. WATER AND SYRUP REQUIREMENTS
Minimum
Water/Soda
40 PSIG (2.8 kg/cm2)
Syrup (Sugar)
20 PSIG (2.8 kg/cm2)
3. INSTILLATION
Water pipe connections and fixtures directly connected to a potable water supply shall be sized,
installed and maintained in accordance with federal, state and local codes.
THIS EQUIPMENT TO BE INSTALLED WITH ADEQUATE BACKFLOW PROTECTION.
A. Mounting base to countertop with screws.
1. Align front edge of provided template parallel to front edge of countertop.
2. Maintaining parallel alignment, position nozzle centerlines at desired location from front edge
of countertop.
3. Secure template to countertop using tape.
4. Drill four (4) holes to accept 1/4-20 mounting screws/bolts (not included) at specific locations
on template.
5. Use selected screws/bolts to mount base to countertop.
6. Place urn over mounting base. Turn urn counterclockwise to engage locking mechanism.
B. Mounting base to countertop with VHB tape
1. Align front edge of provided template parallel to front edge of countertop.
2. Maintaining parallel alighnment, position nozzle centerlines at desired location from front edge
of countertop.
3. Once urn position has been determined, meausre from front edge of countertop to centerline
of base on template.
4. Remove template. Measure from front edge of countertop desired distance as determined in
step 3.
5. Clean countertop using isopropyl alcohol. Remove red backing tape from bottom of base.
6. Place center of base at measured distance determined in step 4, ensuring that front edge of
base (with drain adapter included) is parallel to front edge of countertop before applying base
to countertop. Press down firmly to ensure proper adhesion of VHB tape.
7. Place urn over mounting base. Turn urn counterclockwise to engage locking mechanism.
2
Maximum
110 PSIG (7.73 kg/cm2)
70 PSIG (4.92 kg/cm2)
IMPORTANT

Advertisement

loading