Supermicro SUPERO X8DTN+ User Manual page 88

X8DTN+ User's Manual
Channel Number - Enter the channel number for the SET LAN Confi guration
command. This is initially set to [1]. Press <+> or <-> on your keyboard to change
the Channel Number.
Channel Number Status - This feature returns the channel status for the
Channel Number selected above: "Channel Number is OK" or "Wrong Channel
Number".
IP Address Source
This feature allows the user to select the source of the IP address for the system.
If Static is selected, the user will need to manually enter the IP address for the
system. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Confi guration Protocol) server in the network that the system is attached to, and
request the next available IP address. The options are DHCP and Static. If Static
is selected, the following items will be available for confi guration.
IP Address
The BIOS will automatically enter the IP address of this machine; however it
may be over-ridden. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should
not exceed 255.
Subnet Mask
This item displays the current subnet mask setting for your IPMI connection. The
value of each three-digit number separated by dots should not exceed 255.
Gateway Address
The BIOS will automatically enter the Gateway address of this machine; however
it may be over-ridden. Gateway addresses are 4-decimal numbers in dotted quad
form (i.e., 192.168.10.253). The value of each 3-digit number separated by dots
should not exceed 255.
Mac Address
The BIOS will automatically enter the Mac address of this machine; however it
may be over-ridden. Mac addresses are 6 two-digit hexadecimal numbers (Base
16, 0 ~ 9, A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).
Event Log Confi guration
View Event Log
Use this option to view the System Event Log.
4-24