Processor And Heatsink Installation - Supermicro SUPERO X8DTN+ User Manual

X8DTN+ User's Manual
2-2

Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on
!
the label area of the fan.
Notes:
1. Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
2. Make sure to install the motherboard into the chassis before you install the
CPU heatsink and heatsink fans.
3. When purchasing a 5500/5600 Series processor or when receiving a moth-
erboard with a 5500/5600 Series processor pre-installed, make sure that the
CPU plastic cap is in place, and none of the CPU pins are bent; otherwise,
contact the retailer immediately.
4. Refer to the MB Features Section for more details on CPU support
Installing an LGA 1366 Processor
1. Press the socket clip to release
the load plate, which covers the
CPU socket, from its locking
position.
2. Gently lift the socket clip to
open the load plate.
3. Hold the plastic cap at its north
and south center edges to re-
move it from the CPU socket.
Socket Clip
Plastic Cap
Hold the north & south edges of
the plastic cap to remove it
2-2
Load Plate