Supermicro SUPERO X8DTN+ User Manual page 42

X8DTN+ User's Manual
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to a hardware reset switch on the
computer case. Refer to the table on
the right for pin defi nitions.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (with a
setting in the BIOS - see Chapter 4).
To turn off the power in the suspend
mode, press the button for at least
4 seconds. Refer to the table on the
right for pin defi nitions.
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Signal
2 +3V Standby
A. Reset Button
B. PWR Button
20
Ground
X
Power LED
HDD LED
NIC1 LED
NIC2 LED
OH/Fan Fail LED
PWR Fail LED
Ground
Ground
2-22
19
NMI
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
A
Reset
Reset Button
B
Power Button
PWR
2 1