Supermicro SUPERO X8DTN+ User Manual page 80

X8DTN+ User's Manual
Onboard LAN Option ROM Select
This feature allows the user to select the onboard LAN option ROM type. The op-
tions are iSCSI and PXE.
Boot Graphics Adapter Priority
This feature allows the user to select the priority graphics adapter for system boot.
The options are Onboard VGA, and PCI-X/PCI-E Slots.

Super IO Device Confi guration
Onboard Floppy Controller
Select Enabled to enable the onboard fl oppy controller. The options are Disabled
and Enabled.
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2
are Disabled, 2F8/IRQ3, 3E8/IRQ4, and 2E8/IRQ3.
Floppy A
This feature allows the user to select the type of fl oppy drive connected to the system
as specifi ed. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3 1/2",
1.44MB 3 1/2" and 2.88MB 3 1/2".
Remote Access Confi guration
Remote Access
This allows the user to enable or disable Remote Access support. The options are
Disabled and Enabled. If Remote Access is set to Enabled, the following items
will display:
Serial Port Number
This feature allows the user decide which serial port to be used for Console Redi-
rection. The options are COM 1 and COM 2.
Base Address, IRQ
This item displays the based address and IRQ of the serial port specifi ed above.
The options are COM 1 and COM 2.
4-16