X8Dtn+ Quick Reference - Supermicro SUPERO X8DTN+ User Manual

Jumper Description
JBT1 CMOS Clear
JWD Watch Dog Enable
2 2
JI C1/JI C2 SMB to PCI-Exp./ SMB to PCI-X Slots
JP3 IDE Enable
JPG1 VGA Enable
JPL1 LAN1/2 Enable
Connector Description
COM1/COM2 COM1/COM2 Serial Port/Header
FAN 1-8 System/CPU Fan Headers (Fans 7/8: CPU Fans)
Floppy Floppy Disk Drive Connector
IPMB (J14) IPMB I
I-SATA0 ~ I-SATA5 (Intel South Bridge) SATA Ports
JD1 PWR LED/Speaker Header (Pins1~3: PWR LED, 4~7: SPKR)
JF1 Front Panel Connector
JL1 Chassis Intrusion Header
JOH1 Overheat LED Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW3/JPW4 8-pin 12-V Power Connectors (Required. See Page1-4)
JTPM1 TPM (Trusted Platform Module) Header
JWF1 Compact Flash Power Connector
JWOL1 Wake-On-LAN Header
LAN1/2 Gigabit Ethernet (RJ45) Ports
PWR I 2 C (J15) Power SMB (I
SIMLP (Low Profi le) SIMLP IPMI 2.0 Socket
SP1 Internal Buzzer
T-SGPIO-1/T-SGPIO-2 Serial General Purpose Input/Output Headers
(B/P) USB0/1 (Back Panel) Universal Serial Bus (USB) Ports
(F/P) USB 2/3, 4, 6, 7 Front Panel Accessible USB Headers
LED Description
LE1 Onboard Standby PWR warning LED Indicator

X8DTN+ Quick Reference

2 C Header (for an IPMI card)
2 C) Header
1-5
Chapter 1: Introduction
Default Setting
(See Section 5-10)
Pins 1-2 (Reset)
Open (Disabled)
1-2 (Normal)
1-2 (Enable)
Pins 1-2 (Enabled)