Remove The Access Panel - HP ProLiant DL180 Gen9 User Manual

Open the cable management arm. The cable management arm can be right-mounted or left-mounted.
2.

Remove the access panel

WARNING:
internal system components to cool before touching them.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
To remove the component:
Power down the server (on page 20).
1.
Do one of the following:
2.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 22).
o
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
3.
Open the locking latch.
4.
The access panel slides back, releasing it from the chassis.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the server for long periods with the access panel open or removed.
Operations 24