Secure the Mini-SAS Y-cable in the right front chassis cable clip.
d.
Install the access panel (on page 25).
11.
Do one of the following:
12.
Slide the server into the rack.
o
Install the server into the rack
o
Power up the server (on page 20).
13.
Install the drives
14.
12-bay LFF hot-plug drive enablement option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
To install the component:
Power down the server (on page 20).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 22).
o
Remove the access panel (on page 24).
4.
("Installing the server into the
("Drive
options" on page 42).
rack" on page 36).
Hardware options installation 50