Hp Trusted Platform Module Option - HP ProLiant DL180 Gen9 User Manual

Select Network Interface Adapter, and then press Enter.
3.
Select ON.
4.
Press F10 followed by Y to save your changes.
5.
Select File | Exit to exit the utility and resume the boot process.
6.
To enable the dedicated iLO management module in UEFI BIOS mode:
During the server startup sequence after module installation, press F9 in the POST screen.
1.
The System Utilities screen appears.
Select System Configuration | iLO 4 Configuration Utility.
2.
The iLO 4 Configuration Utility screen appears.
Select Network Interface Adapter, and then press Enter.
3.
Select ON.
4.
Press F10 to save your changes.
5.
Press Esc until the main menu is displayed.
6.
Select Exit and Resume Boot in the main menu, and then press Enter.
7.
When prompted to confirm the request, press Enter to exit the utility and resume the boot process.
8.

HP Trusted Platform Module option

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 93).
1.
Retaining the recovery key/password (on page 94).
2.
Enabling the Trusted Platform Module (on page 94).
3.
Enabling the TPM requires accessing BIOS/Platform Configuration (RBSU) in HP UEFI System Utilities
(on page 113).
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
(http://www.microsoft.com).
CAUTION:
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
•
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
•
When installing or replacing hardware, HP service providers cannot enable the TPM or the encryption
technology. For security reasons, only the customer can enable these features.
•
When returning a system board for service replacement, do not remove the TPM from the system board.
When requested, HP Service provides a TPM with the spare system board.
Always observe the guidelines in this document. Failure to follow these guidelines
Hardware options installation 92