I Feel Button - Vivax GWC09TB-S3DNA1B Owner's Manual

Operation of wireless remote controller
This wireless remote control is universal, and it could be used for many units, some
buttons of this control which are not available to this unit will not be described below.
Remote controller
SWING UP AND DOWN button
●
Press this button to set swing angle,
which circularly changes as below:
OFF
This remote controller is universal. If it
receives threes kinds of following status,
the swing angle will remain original.
If guide louver is stopped when it is
swinging up and down, it will remain its
present position.
indicates guide louver swings back and
forth in the five places, as shown in the
figure.
SWING LEFT AND RIGHT button
●
Press this button to set left & right swing angle
cycling as below:
OFF
TIMER OFF
TIMER OFF
●
One press this key to enter into TIMER
OFF setup, in which case the TIMER OFF
icon will blink. The method of setting is
the same as for TIMER ON.
Name and function of wireless remote controller
button
TIMER ON
TIMER ON
●
Timer On setting : Signal "ON" will blink
and display, signal will
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing
it quickly change, the way of change is:
During the initial 2.5 seconds, ten numbers
change in the one place of minute, then
the one place is constant, ten numbers
change in the tens place of minute at 2.5
seconds speed and carry. During 5s blink,
press the Timer button, the timer setting
succeeds. The Timer On has been set up,
repress the timer button, the Timer On
will be canceled. Before setting the
Timer, please adjust the Clock to the
current actual time.
I FEEL
I FEEL
●
Press this button once, to turn on the
I FEEL function, then the figure of "I FEEL"
will be displayed, after every press of
other function button, every 200ms to send
I FEEL once, after this function started,
the remote control will send temperature
to the main un it in every 10 minutes. When
repress this button, this function will be
turned off.
/
HEALTHY AND SCAVENGING
●
Press this button to achieve the on and
off of healthy and scavenging functions in
operation status. Press this button for the
first time to start scavenging function;
LCD displays "
second time to start healthy and scavenging
functions simultaneously; LCD displays "
and "
time to quit healthy and scavenging functions
simultaneously. Press the button for the
fourth time to start healthy function; LCD
display "
repeat the operation above.
Note: Optional for some models.
7
button
conceal, the
or button to adjust the
or button, 2 seconds later ,
button
button
". Press the button for the
" . Press this button for the third
" . Press this button again to
"