Adjusting the Airfl ow Direction
and Rate
13
01_EN_3P255639-2A.indd 13
You can adjust the airfl ow direction to increase your comfort.
To start auto swing
Up and down airflow direction
Press
• "
" is displayed on the LCD.
•
The aps (horizontal blades) will begin to swing.
To set the flaps at desired position
•
This function is effective while aps are in auto swing mode.
Press
desired position.
• "
" disappears from the LCD.
To adjust the louvers at desired position
Hold the knob and move the louvers.
•
You will fi nd a knob on the left-side and the right-side
blades.
•
When the unit is installed in the corner of a room, the
direction of the louvers (vertical blades) should be facing
away from the wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
•
If the flaps are in the way, press
of the way and then adjust the louvers.
.
when the flaps have reached the
on the remote controller to move the flaps out
2/16/2011 2:43:18 PM