Auto · Dry · Cool · Heat · Fan Operation - Daikin FTXG25JV1BW Operation Manual

Hide thumbs Also See for FTXG25JV1BW:
Table of Contents

Advertisement

AUTO · DRY · COOL · HEAT ·
FAN Operation
NOTE
MODE
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in
lower outdoor temperatures. If the heating effect is insuf¿ cient, it is recommended to use another heating appliance in
combination with the air conditioner.
HEAT
The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation,
it takes some time before the room gets warmer.
In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches
into defrosting operation to take away the frost.
During defrosting operation, hot air does not À ow out of indoor unit.
This air conditioner cools the room by releasing the heat in the room outside.
COOL
Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is high
The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically
DRY
controls temperature and airÀ ow rate, so manual adjustment of these functions is unavailable.
In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room and outside
AUTO
temperatures and starts the operation.
The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
FAN
This mode is valid for fan only.
11
01_EN_3P255639-2A.indd 11
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation mode.
„ To start operation
1.
Press
Each pressing of the button advances the mode setting in sequence.
AUTO
2.
Press
.
• "
" is displayed on the LCD.
The multi-monitor lamp lights up.
The colour of the lamp varies depending on the
operation mode.
Display
To stop operation
Press
again.
"
" disappears from the LCD.
The multi-monitor lamp goes off.
Notes on each operation mode
and select an operation mode.
DRY
COOL
HEAT
FAN
Operation
Multi-monitor lamp
AUTO
Red/Blue
DRY
Green
COOL
Blue
HEAT
Red
FAN
White
2/16/2011 2:43:14 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents