Removing The Front Panel - Daikin FTXG25JV1BW Operation Manual

„

Removing the front panel

1.
Remove the front panel.
• Open the front panel.
• Open the front panel at least 90 degrees.
• Release the front panel locks on each side, and
disconnect the front panel shaft.
1) Pull
Front panel locks
Open at least 90 degrees.
• Disconnect the front panel shaft on the other
side in the same manner.
CAUTION
• When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
• When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
• After cleaning, make sure that the front panel is securely ¿ xed.
01_EN_3P255639-2A.indd 34
2) Slide Front panel shaft
4) Pull
3) Slide
4) Pull
3) Slide
2.
Clean the front panel.
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
3.
Attach the front panel.
• Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Front panel shaft 1) Slide
Slot
Front panel locks
• Close the front panel slowly.
2) Push
34
2/16/2011 2:44:16 PM