Service As Required; Replacing Fuses; Replacing Bulbs - Kubota T1880 Operator's Manual

50 PERIODIC SERVICE

SERVICE AS REQUIRED

BReplacing Fuses
Replacement of the fuse
1. Open hood.
2. Remove the blown fuse.
3. Place a new 3A or 5A fuse in position.
(1) Fuse location
(2) Slow blow fuse
(3) Fuse location
A If the new fuse happens to blow out within a short time,
contact your dealer for inspection and repair.
Never "jump" the fuse with wire or foil, etc.
C Protected circuit
FUSE NO. CAPACITY
(ID LABEL) (A)
IG/M
(1)
OPC
(2) Slow blow fuse
(3) -
BReplacing bulbs
(A) Replacement of the headlight bulb
1. Open hood.
2. Turn bulb socket to remove socket from headlight
housing.
3. Push bulb down and turn one quarter turn to remove
bulb from the socket.
4. Install new bulb to the socket.
5. Install the socket in housing.
6. Close hood.
Headlight bulb
(B) Replacement of the Indicator light bulb
1. Open hood.
2. Turn bad bulb socket to the left.
And remove it.
3. Pull bulb from the socket.
4. Push new bulb into the socket.
5. Install the socket.
6. Close hood.
Indicator light bulb
Protected circuit
5 Main fuse
3 Engine running circuit
Check circuit against
20
wrong battery connection
3 KRA system
12.8 Rated Voltage/
1.04 AMP/15 MSCP
14.0 Rated Voltage/
0.27 AMP/2 MSCP