Adjusting The Clamp; Side Discharge Position; Mulching Position - Kubota T1880 Operator's Manual

28 OPERATING THE MOWER

ADJUSTING THE CLAMP

To avoid personal injury:
A Shut off the engine and remove the key.
Make sure the mulching cover is fixed securely. If not,
adjust the clamp stay and the hook plate to fix it.
BSide Discharge Position
1. Hang the rear part of the mulching cover on the hook
in the rear of the mower deck.
2. Loosen the bolts of the clamp stay.
3. While pushing the mulching cover to the mower deck
stopper, fasten the clamp.
4. Adjust the clamp stay so that the clamp would not be
loosen, and then fasten the bolts securely.
(1) Clamp
(2) Clamp stay
(3) Stopper
(4) Bolt
(5) Mulching cover
BMulching Position
1. Put the mulching cover in the mulching position.
(1) Discharge deflector
(2) Mower cover
(3) Mulching cover
2. Loosen the bolts of the hook plate.
3. While pushing the mulching cover to the front fully,
fasten the clamp.
4. Adjust the hook plate so that the clamp would not be
loosen, and then fasten the bolts securely.
(1) Clamp
(2) Hook plate
(3) Bolt
A Do not touch the clamp stay for adjusting the
clamp in the mulching position.