Every 100 Hours; Changing Engine Oil - Kubota T1880 Operator's Manual

42 PERIODIC SERVICE

EVERY 100 HOURS

BChanging Engine Oil
Every 100 hours of operation or annually change the
engine oil.
1. To change the used oil, remove the drain plug at the
side of the engine and drain the oil completely. The
used oil can be drained out more easily if the engine is
warm.
(1) Drain plug
2. Fill with the new oil up to the full level on the dipstick.
Do not overfill.
(1) Engine oil port
(2) Oil level dipstick
3. To check the oil level.
[T2080, T2380]
Remove the dipstick, wipe it clean, replace it WITHOUT
SCREWING IT IN, and draw it out again. Check to see
that the oil level is between the two marks.
[T1880]
Remove the dipstick, wipe it clean, replace it, and draw it
out again. Check to see that the oil level is between the
two marks.
(A) "UPPER LEVEL"
(B) "LOWER LEVEL"