Preparing The Remote Control - Lanzar SD43MU Instruction Manual

Remote Control

Preparing the Remote Control

Installing The Lithium Coin Battery
1.First push to inside as the direction indicated by the arrow (See
Remove the battery holder as the direction indicated by the arrow (See
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See ).
3
3.Insert the battery holder. Push in the holder to the original position(See
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver), make sure there is no obstacle in between .
Operation angle: About
Warning :
Do not install any battery other than CR2025 or its equivalent;
otherwise , it may explode .
Store the battery in a place where children cannot reach to avoid risk
of accident .
30 degree in each the direction of the front of the IR mark.
11
1 )And then
2 ).
4
).
CR2025