Other Main Operations; Usb Operations; Aux Operations - Lanzar SD43MU Instruction Manual

Other Main Operation
USB Operation (17)
Following the diagram below, connect
your USB device to the front panel
USB port . If it is properly connected,
the device will be mounted and start
playing automatically.
you can also select the desired item of
.
the USB device The buttons on the
remote control, on the device, have the
same functions as the touch buttons
of this touch screen have .
In USB Playback mode
Use the UP, DOWN, RIGHT or LEFT
buttons to navigate to and select files
to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files). To skip to the next or
last track, touch or press the
Press the or
Forward or Fast Reverse playback.
REPEAT play modes are also available
by repeatedly pushing
the desired mode is found.
Changing From USB to DISC Playback
Modes
If you are in USB Playback mode and
wish to begin playback of a disc already
in the player, touch the
touch screen or press the STOP on the
remote once. Then touch GOTO range
on the screen or press the GOTO on the
remote and the player will switch to
DVD/VCD/CD/MP3 Playback mode.
Changing From DISC to USB Playback
Modes
If the disc present in the player is an
MP3 disc, touch
or press the STOP on remote once then
touch or press the GOTO to USB
playback.
USB port
(USB connect line)
or
buttons for Fast
REPEAT until
range on the
section on screen
If the disc present in the player is an
DVD or VCD or CD disc, touch
the screen or press STOP twice on the
remote then touch GOTO section on
the screen or press the GOTO button
on the remote to USB playback.
Important Note:
To prevent damage to the USB device,
do not remove or disconnect it during
playback. it is also a good practice to
remove the USB drive during disc
playback.
AUX Operation
To connect analogue replay devices.
Use this jack to replay sound of other
replay equipment such as DVD players,
computers, etc. Via the loudspeakers.
.
TOUCH SCREEN
AUX IN
AUX Socket
1). Please connect the external device
with stereo jack plug the Aux in socket .
2). Touch the MOD section on screen
or press the MOD button to select the
AUX IN connection. It will display the
following as below :
SWF
SWF LUD
VOLUME-
Touch to select
3). Touch the volume+/- sections on
touch screen or press the VOL+/- on
the remote to adjust the volume level.
31
AUX IN
POP
DISC 11:08 AM
DSP CLK MOD
SEL VOLUME+
on