Setup; General Setup - Lanzar SD43MU Instruction Manual

Setup

USING THE MENU
....GENERAL SETUP PAGE....
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
Go To General Setup Page
1. Touch the
SET
on touch screen (or press the SETUP
on the remote .)
2.The SETUP menu is displayed.
3.Select the preferred item by touch the
/ / / range on the screen
or by using the
4.Touch the ENT section on screen or
Press ENTER button on remote to
confirm .
The Following Buttons For Entering
The Selection .
ENT
Previous
Enter Down
Up
The buttons of the left and right are for
selection of setting type .
The buttons of the up and down are for
selection of the setting program .
Overview Of The Main Menu
( ) ( )
1 2
(1).General Settings
(2).Speaker Settings
(3).DOLBY Digital Settings
(4).Preference Settings
DOLBY
LB
ON
ENG
SPDIF/RAW
ON
ON
ON
section of DVD setup
/ / / buttons .
Touch to select
Left
Right
DOLBY
( ) ( )
3 4

GENERAL SETUP

TV Setting
....GENERAL SETUP PAGE....
TV Display
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
Set TV Display Mode
16:9
4:3 Pan Scan
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
26
DOLBY
Nor mal/PS
Nor mal/LB Nor mal/LB
Wide
4:3 Letter Box