Installation Checklist - BT Versatility Installation And Maintenance Manual

BT Versatility
Installation and Maintenance Manual

Installation checklist

Carry out the following steps to install the system:
First, read the safety and precaution information on page 3 carefully.
Second, mount the Main Equipment as detailed in the section on page 7.
Third, install the Network and Expansion modules as required
At least one Analogue Line Module must be installed to access the Analogue network.
At least one ISDN Basic Rate Module must be installed to access the ISDN network.
A Ports module must be installed if the following is required:
– More than 8 Extensions
– More than four Analogue Lines
– More than two ISDN Basic Rate Accesses
– More than one ISDN S-bus
An Options Module must be installed if External Music on Hold, External Extension or
Central Bell is required.
An Internet module must be installed if an internal LAN or connection to an ADSL Line
is required.
A Voice Module must be installed to provide Voicemail or Auto Attendant functionality.
The Battery Back Up Module and battery must be installed if battery back up is required.
Fourth, cable the Extensions to the Main Equipment and install the system
Featurephones and standard telephones as detailed in the Cabling Section Page 31.
This section also covers installation the following:
• Long-line Extension,
• Door Intercom,
• Doorstrike,
• Central Bell,
• External Music-on-Hold,
• Public Address
• V24 Interface to provide Call Logging.
Fifth, cable the Analogue and ISDN Line connections as detailed in the cabling
section Page 33.
Sixth, commission the system and provide customer training as detailed in the
Commissioning section Page 46 and 52.
6