Miele W 1913 Operating Instructions Manual page 18

How to wash correctly
H Start the programme
^ Press the flashing Start/Stop button.
The estimated programme duration will
appear in the display once the
programme has started. During the first
8 minutes the machine measures how
much water is being absorbed by the
laundry. The programme duration may
be longer or shorter depending on this
absorbency rate.
The programme sequence is also
shown in the display. The programme
sequence display shows the stage the
programme has reached.
I Remove the laundry when the
programme has finished.
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
0:00 Anti-crease
and
0:00 Finish
^ Press the Door button to open the
drum door.
^ Remove the laundry.
18
Check that all items have been
removed from the drum. Left items
might shrink in the next wash or
discolour other items.
^ Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
^ Switch the machine off with the _
button.
To avoid the build-up of mildew, it is
recommended that the door is left
ajar when the machine is not in use.