Faceplate Release; Remote Sensor (Optional); Reset Button Function - Lanzar Vibe VBD300 Owner's Manual

Pll synthesizer stereo radio with compact disc player digital

Table of Contents

(23) AUTOMATICALLY STORING & PROGRAM SCANNING

Automatically Storing

Press and hold AMS button (23) for several seconds to toggle automatically storing

function. It starts searching next frequency in local mode and stores the clear station

into the preset memory. If 6 ch. is not fully memorised, it would start the second

searching in distance mode. At the end of automatically storing operation, mode is

changed to Preset Scan.

Preset Scanning

Press AMS button (23) shortly to toggle preset scanning function. During the scanning,

it will stop at every stored station for several seconds and the number of the channel

being scanned flashes on the display. Press it again to stop scanning.

(24) FACEPLATE RELEASE

Press RELEASE button (24) to detach the removable faceplate.

(25) EQUALIZATION

Press EQ button (25) to turn on equalization function and to select desired audio

mode. There are four kinds of mode as below:

FLAT

ROCK

CLASSIC

POP

Point the remote handset to control the remote sensor (26).

Press the function keys on the remote handset to control the system.

RESET button (27) is placed on the housing and must be activated with either a ball

point pen or thin metal object. The reset button is to be activated for the following

reasons:

• Initial installation of the unit when all wiring is completed.

• All the function buttons do not operate.

• Error symbol on the display.

Note: If press RESET button (27), the unit can't work yet, please use a cotton swab

soaked in isopropyl alcohol to clean the socket on the back of the front panel.

Table of Contents