Table of Contents
Advertisement
Press MON button (4) to select monaural or stereo (Mono reception for radio stations).
You can sometimes improve reception of distant stations by selecting mono operation.
(4) SUB-WOOFER (FOR SUB.W. VERSION ONLY)
Press X-BAS button (4) to toggle sub-woofer output, when sub-woofer on, display
will show " SW".
Press LOU button (5) to increase bass output and display will show "LOUD".
Press and hold the DSP button (6), then press the +/
/– (14) to change hours.
Push a CD into slot. The CD will begin to play. Press
play and eject CD from slot. Receiver switches to radio operation.
Press SEL button (8) to move display through bass, treble, balance, fader and volume
functions. Use
not been adjusted for several seconds, display returns to normal radio or CD display.
BAS
(Bass)
Bass
Press SEL button (8) for one time. Adjust bass level using
Treble
Press SEL button (8) for two times. Adjust treble level using
Balance
Press SEL button (8) for three times. Adjust sound balance between left and right
speakers using
Fader
Press SEL button (8) for four times. Adjust sound balance between front and rear
speakers using
Volume
Press SEL button (8) for five times. Adjust volume level using
Press BND button (11) to change between three FM bands and two AM bands and
one LW band. Each band stores up to six preset stations.
Press MOD button (12) to choose desired listening mode.
(e.g. radio mode to CD mode to CDC mode).
[(e.g. radio mode to CD mode to to AUX (Line)]
(4) MONO/STEREO (FOR MON VERSION ONLY)
(6) SET THE CLOCK
(8, 9 & 10) SELECT MODE
(9) and
(10) buttons to adjust the selected mode. When mode has
TRE
(Treble)
(9) and
(10) buttons.
(9) and
(10) buttons.
FM1
FM2
(12) SELECT LISTENING MODE
(5) LOUDNESS
(7) EJECT
BAL
(Balance)
(11) BAND
FM3
AM1/MW
7
(15) to change minutes or
(eject) button (7) to stop CD
FAD
VOL
(Fader)
(Volume)
(9) and
(9) and
(9) and
AM2/LW
(10) buttons.
(10) buttons.
(10) buttons.
Advertisement
Table of Contents
